Operation Instructions:  

• This appliance may have a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way.
• If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
• Do not attempt to force the plug into an improper outlet.

For U.S. residents only: In the event of an unusual circumstance such as immersion, the protective device will not allow the dryer to operate. Periodically check the safety plug to verify it is in proper working order. Plug the appliance in an electrical outlet and press the test button. The dryer should stop immediately. To resume operation, press the reset button.

Cleaning Instructions for Lint Filter(s)

LINT FILTERS DIFFER FROM DRYER TO DRYER. Some dryers have a filter inside the Hinged End Cap as well as an internal filter inside the air intake. Others have only an internal lint filter inside the air intake grill.

CLEAN THE LINT FILTER DAILY. This will extend the life of your dryer and prevent it from overheating and shutting off.

• Open the Hinged End Cap by pushing away from the dryer.
• Remove dust and lint from the internal lint filter using a brush, fingers or a vacuum cleaner.
• Your dryer may also have a lint filter attached to the Hinged End Cap. If it does, clean that filter in the same manner, removing dust and lint from both the inside and outside of the filter.
• Close the Hinged End Cap by pushing toward the dryer.

Styling Tips:

• Gently towel-dry hair to remove excess water.
• Set dryer on highest setting and speed and circulate the airflow through your hair. Do not concentrate airflow on any one area.
• When hair is almost completely dry, lower heat and speed setting and begin to style hair as desired.
• Use the concentrator attachment for a more directed airflow. To use, attach the concentrator to the air outlet. To remove, allow dryer and attachment to cool, then gently pull away from dryer.
• The Finger Diffuser will soften the airflow from the hair dryer. To use, attach the finger diffuser to the air outlet. Allow diffuser fingers to run gently over the scalp while drying. To remove, allow dryer and attachment to cool, then gently pull away from dryer.
• Push the Cool Shot Button to set the style with cool air once you’ve achieved the desired style.
• When drying is complete, wait for the appliance to cool before storing. Do not wrap the cord around the dryer. Use the Hanging Ring. This keeps the cord from tangling and wearing prematurely.