This light can be used to cure UV and LED gel products:

1. Gather everything you need and apply Base Coat of Shellac/Gel polish to one hand
2. Cure polish under lamp. Cure LED polish for 60 seconds, UV polish for up to 2 minutes. 
3. Repeat on other hand 
4. Apply 1st coat of color to one hand. Polish should not touch skin or cuticle. Be sure to clean up excess polish on skin with acetone or alcohol using a q tip, wooden stick, or nail art brush. 
5. Cure polish. Repeat on other hand. Cure LED polish for 60 seconds, UV polish for up to 2 minutes. 
6. Apply a second coat and repeat the curing process on each hand
7. Apply top coat and repeat curing process on each hand 
8. When all coats of polish are applied and cured, wipes each nail with a lint free nail wipe or cotton ball soaked in cleaning or alcohol solution. This will remove the sticky finish that will be on your nails. 
9. Apply cuticle oil to each hand and you are done! 

Curing options:

1. 10 seconds: Press the 10S button to cure small nail art designs, such as dots or lines for 10 seconds.
2. 30 seconds: Press the 30S button to cure large nail art designs, such as flowers or checkers.
3. 60 seconds: Press the 60S button to cure regular coats of UV or LED Gel nail polish 
4. Low heat mode: Press the 99S low heat mode button to cure at 24W for 50 sec, then 48W for 50 sec. Use if you have sensitive nails, or experience heat spikes.