Operating Instructions:

• This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way.
• If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
• Do not attempt to defeat this safety feature.

Start-up:

• Plug the straightener into an electrical outlet. The blue LCD light will flash and display “OFF” and “HOT TOOLS”. Press and hold the Power Button (o / ı) until temperature is displayed, which also indicates the unit is on.
• To select a higher temperature, press the (+) button, and to select a lower temperature, press the (-) button. The LCD light will turn blue when selecting temperatures. Once selected temperature has been reached, the LCD light will change to green.
• Wait for iron to heat up, which takes approximately 60 seconds. For optimum styling temperature, allow iron to heat for 2-3 minutes before using.

Automatic Worldwide Dual Voltage:

• This appliance will automatically adjust to the proper voltage. In North America, connect the plug into any outlet. Outside North America, use a plug adapter of the proper configuration with the plug before connecting into any outlet.

Adjustable Auto Shut-Off

• The Auto Shut-off feature is automatically “On” when you turn on the iron.
• The default Auto Shut-off time is 2 hours.
• To change the Auto-shut off time, press the (-) button for 2-3 seconds, the LCD will display “120” with a red background.
• Click the (-) key to change time in increments of 10 (120, 110, 100, 90, 80, 70, 60, 50, 40, 30, 20, 10).
• The Shut-off feature will automatically turn your iron off, if you forget to do so, in the selected time.

Helpful Styling Hints:

• Hair should be clean and dried completely before using any styling tool.
• Separate a 1-inch section of hair, gently place hair between the Straightening Plates and clamp the straightener down firmly on the hair. You will achieve professional results if you work from the scalp to the ends of your hair.
• Carefully slide the iron along the isolated section, making sure the hair is heated and straightened all the way to the ends. The ends will probably require less heat than the hair which grows closer to the scalp.
• For best results, hold end of hair while smoothing the hair section.
• To create flips or curls, use rounded edge of iron’s Straightening Plates to curl ends out or under.
• To remove hair from the straightener, release pressure and allow the hair to gently slip out from the Straightening Plates.
• The straightening process does not require overlapping. Separate each section of hair and work on it as indicated above.
• Allow hair to cool before combing or brushing.
• Repeat the process until you have achieved the look you desire.
• When styling is complete, press and hold the Power Button (o / ı) to turn off. The blue LCD light will flash and display “OFF.”
• Unplug the appliance and allow it to cool before storing.

Heat Selection Guidelines:

Caution: Flat irons with heat controls operate at high temperatures when used on high settings. When using for the first time, begin with the LOWEST setting. Please read all instructions carefully before using. For best results, follow these guidelines:

• 170°F - 250°F For fragile hair
• 250°F - 300°F For fine, thin, hair
• 300°F - 350°F For normal hair
• 350°F - 400°F For wavy, medium-textured hair
• 400°F - 450°F For thick, coarse hair